List of Additional Sense Codes (ASC) and Additional Sense Code Qualifiers (ASCQ) that busTRACE 6.0 decodes. Note that we update our CDB database on a regular basis so this list will grow and expand periodically.
ASC |
ASCQ |
Description |
00h |
00h |
No additional sense information |
00h |
01h |
Filemark Detected |
00h |
02h |
End-of-partition/medium detected |
00h |
03h |
Setmark Detected |
00h |
04h |
Beginning-of-partition/medium detected |
00h |
05h |
End-of-data detected |
00h |
06h |
I/O process terminated, play operation aborted |
00h |
11h |
Audio play operation in progress |
00h |
12h |
Audio play operation paused |
00h |
13h |
Audio play operation successfully completed |
00h |
14h |
Audio play operation stopped due to error |
00h |
15h |
No current audio status to return |
00h |
16h |
Operation in progress |
00h |
17h |
Cleaning requested |
00h |
18h |
Erase operation in progress |
00h |
19h |
Locate operation in progress |
00h |
1Ah |
Rewind operation in progress |
00h |
1Bh |
Set Capacity operation in progress |
00h |
1Ch |
Verify operation in progress |
00h |
1Dh |
ATA Pass Through Information Available |
01h |
00h |
No index/sector signal |
02h |
00h |
No seek complete |
03h |
00h |
Peripheral device write fault |
03h |
01h |
No write current |
03h |
02h |
Excessive write errors |
04h |
00h |
Logical unit not ready, cause not reportable |
04h |
01h |
Logical unit is in process of becoming ready |
04h |
02h |
Logical unit not ready, initializing command required |
04h |
03h |
Logical unit not ready, manual intervention required |
04h |
04h |
Logical unit not ready, format in progress |
04h |
05h |
Logical unit not ready, rebuild in progress |
04h |
06h |
Logical unit not ready, recalculation in progress |
04h |
07h |
Logical unit not ready, operation in progress |
04h |
08h |
Logical unit not ready, long write in progress |
04h |
09h |
Logical unit not ready, self-test in progress |
04h |
0Ah |
Logical unit not accessible, asymmetric access state transition |
04h |
0Bh |
Logical unit not accessible, target port in standby state |
04h |
0Ch |
Logical unit not accessible, target port in unavailable state |
04h |
10h |
Logical unit not ready, auxiliary memory not accessible |
04h |
11h |
Logical unit not ready, notify (enable spinup) required |
04h |
12h |
Logical unit not ready, offline |
05h |
00h |
Logical unit does not respond to selection |
06h |
00h |
No reference position found (medium may be upside down) |
07h |
00h |
Multiple peripheral devices selected |
08h |
00h |
Logical unit communication failure |
08h |
01h |
Logical unit communication time-out |
08h |
02h |
Logical unit communication parity error |
08h |
03h |
Logical unit communication CRC error (Ultra-DMA) |
08h |
04h |
Unreachable copy target |
09h |
00h |
Track following error |
09h |
01h |
Tracking servo failure |
09h |
02h |
Focus servo failure |
09h |
03h |
Spindle servo failure |
09h |
04h |
Head select fault |
0Ah |
00h |
Error log overflow |
0Bh |
00h |
Warning |
0Bh |
01h |
Warning - specified temperature exceeded |
0Bh |
02h |
Warning - enclosure degraded |
0Bh |
03h |
Warning - background self-test failed |
0Bh |
04h |
Warning - background pre-scan failed |
0Bh |
05h |
Warning - background medium scan failed |
0Ch |
00h |
Write error |
0Ch |
01h |
Write error - recovered with reallocation |
0Ch |
02h |
Write error - auto reallocation failed |
0Ch |
03h |
Write error - recommend reassignment |
0Ch |
04h |
Compression check miscompare error |
0Ch |
05h |
Data expansion occurred during compression |
0Ch |
06h |
Block not compressible |
0Ch |
07h |
Write error - recovery needed |
0Ch |
08h |
Write error - recovery failed |
0Ch |
09h |
Write error - loss of streaming |
0Ch |
0Ah |
Write error - padding blocks added |
0Ch |
0Bh |
Auxiliary memory write error |
0Ch |
0Ch |
Write error - unexpected unsolicited data |
0Ch |
0Dh |
Write error - not enough unsolicited data |
0Dh |
00h |
Error detected by third party temporary initiator |
0Dh |
01h |
Third party device failure |
0Dh |
02h |
Copy target device not reachable |
0Dh |
03h |
Incorrect copy target device type |
0Dh |
04h |
Copy target device data underrun |
0Dh |
05h |
Copy target device data overrun |
0Eh |
00h |
Invalid information unit |
0Eh |
01h |
Information unit too short |
0Eh |
02h |
Information unit too long |
0Eh |
03h |
Invalid field in Command Information Unit |
0Fh |
00h |
Reserved |
10h |
00h |
ID CRC or ECC error |
10h |
01h |
Data block guard check failed |
10h |
02h |
Data block application tag check failed |
10h |
03h |
Data block reference tag check failed |
11h |
00h |
Unrecovered read error |
11h |
01h |
Read retries exhausted |
11h |
02h |
Error too long to correct |
11h |
03h |
Multiple read errors |
11h |
04h |
Unrecovered read error - auto reallocate failed |
11h |
05h |
L-EC uncorrectable error |
11h |
06h |
CIRC unrecovered error |
11h |
07h |
Resynchronization error |
11h |
08h |
Incomplete block read |
11h |
09h |
No gap found |
11h |
0Ah |
Miscorrected error |
11h |
0Bh |
Unrecovered read error - recommend reassignment |
11h |
0Ch |
Unrecovered read error - recommend rewrite the data |
11h |
0Dh |
Decompression CRC error |
11h |
0Eh |
Cannot decompress using declared algorithm |
11h |
0Fh |
Error reading UPC/EAN number |
11h |
10h |
Error reading ISRC number |
11h |
11h |
Read error - loss of streaming |
11h |
12h |
Auxiliary memory read error |
11h |
13h |
Read error - failed retransmission request |
12h |
00h |
Address mark not found for ID field |
13h |
00h |
Address mark not found for data field |
14h |
00h |
Recorded entity not found |
14h |
01h |
Record not found |
14h |
02h |
Filemark or setmark not found |
14h |
03h |
End-of-data not found |
14h |
04h |
Block sequence error |
14h |
05h |
Record not found - Recommend reassignment |
14h |
06h |
Record not found - Recommend reassignment |
14h |
07h |
Locate operation failure |
15h |
00h |
Random positioning error |
15h |
01h |
Mechanical positioning error |
15h |
02h |
Positioning error detected by read of medium |
16h |
00h |
Data synchronization mark error |
16h |
01h |
Data sync error - data rewritten |
16h |
02h |
Data sync error - Recommend rewrite |
16h |
03h |
Data sync error - Data auto-reallocated |
16h |
04h |
Data sync error - Recommend reassignment |
17h |
00h |
Recovered data with no error correction applied |
17h |
01h |
Recovered data with retries |
17h |
02h |
Recovered data with positive head offset |
17h |
03h |
Recovered data with negative head offset |
17h |
04h |
Recovered data with retries and/or CIRC applied |
17h |
05h |
Recovered data using previous sector ID |
17h |
06h |
Recovered data without ECC - data auto-reallocated |
17h |
07h |
Recovered data without ECC - recommend reassignment |
17h |
08h |
Recovered data without ECC - recommend rewrite |
17h |
09h |
Recovered data without ECC - Data rewritten |
18h |
00h |
Recovered data with error correction applied |
18h |
01h |
Recovered data with error correction and retries applied |
18h |
02h |
Recovered data - data auto-reallocated |
18h |
03h |
Recovered data with CIRC |
18h |
04h |
Recovered data with L-EC |
18h |
05h |
Recovered data - recommend reassignment |
18h |
06h |
Recovered data - recommend rewrite |
18h |
07h |
Recovered data with ECC - data rewritten |
18h |
08h |
Recovered data with linking |
19h |
00h |
Defect list error |
19h |
01h |
Defect list not available |
19h |
02h |
Defect list error in primary list |
19h |
03h |
Defect list error in grown list |
1Ah |
00h |
Parameter list length error |
1Bh |
00h |
Synchronous data transfer error |
1Ch |
00h |
Defect list not found |
1Ch |
01h |
Primary defect list not found |
1Ch |
02h |
Grown defect list not found |
1Dh |
00h |
Miscompare during verify operation |
1Eh |
00h |
Recovered ID with ECC correction |
1Fh |
00h |
Partial defect list transfer |
20h |
00h |
Invalid command operation code |
20h |
01h |
Access denied - initiator pending-enrolled |
20h |
02h |
Access denied - No access rights |
20h |
03h |
Access denied - Invalid mgmt id key |
20h |
04h |
Illegal command while in write capable state |
20h |
05h |
Obsolete |
20h |
06h |
Illegal command while in explicit address mode |
20h |
07h |
Illegal command while in implicit address mode |
20h |
08h |
Access denied - Enrollment conflict |
20h |
09h |
Access denied - Invalid lu identifier |
20h |
0Ah |
Access denied - Invalid proxy token |
20h |
0Bh |
Access denied - ACL lun conflict |
21h |
00h |
Logical block address out of range |
21h |
01h |
Invalid element address |
21h |
02h |
Invalid address for write |
22h |
00h |
Illegal function |
23h |
00h |
Reserved |
24h |
00h |
Invalid field in CDB |
24h |
01h |
CDB decryption error |
24h |
02h |
Obsolete |
24h |
03h |
Obsolete |
24h |
04h |
Security audit value frozen |
24h |
05h |
Security working key frozen |
24h |
06h |
Nonce not unique |
24h |
07h |
Nonce timestamp out of range |
25h |
00h |
Logical unit not supported |
26h |
00h |
Invalid field in parameter list |
26h |
01h |
Parameter not supported |
26h |
02h |
Parameter value invalid |
26h |
03h |
Threshold parameters not supported |
26h |
04h |
Invalid release of persistent reservation |
26h |
05h |
Data decryption error |
26h |
06h |
Too many target descriptors |
26h |
07h |
Unsupported target descriptor type code |
26h |
08h |
Too many segment descriptors |
26h |
09h |
Unsupported segment descriptor type code |
26h |
0Ah |
Unexpected inexact segment |
26h |
0Bh |
Inline data length exceeded |
26h |
0Ch |
Invalid operation for copy source or destination |
26h |
0Dh |
Copy segment granularity violation |
26h |
0Eh |
Invalid parameter while port is enabled |
26h |
0Fh |
Invalid data-out buffer integrity check value |
27h |
00h |
Write protected |
27h |
01h |
Hardware write protected |
27h |
02h |
Logical unit software write protected |
27h |
03h |
Associated write protect |
27h |
04h |
Persistent write protect |
27h |
05h |
Permanent write protect |
27h |
06h |
Conditional write protect |
28h |
00h |
Not ready to ready change, medium may have changed |
28h |
01h |
Import or export element accessed |
28h |
02h |
Not ready to ready change, format-layer may have changed |
29h |
00h |
Power on, reset, or bus device reset occurred |
29h |
01h |
Power on occurred |
29h |
02h |
SCSI bus reset occurred |
29h |
03h |
Bus device reset function occurred |
29h |
04h |
Device internal reset |
29h |
05h |
Transceiver mode changed to single-ended |
29h |
06h |
Transceiver mode changed to LVD |
29h |
07h |
I_T Nexus loss occurred |
2Ah |
00h |
Parameters changed |
2Ah |
01h |
Mode parameters changed |
2Ah |
02h |
Log parameters changed |
2Ah |
03h |
Reservations preempted |
2Ah |
04h |
Reservations released |
2Ah |
05h |
Registrations preempted |
2Ah |
06h |
Asymmetric access state changed |
2Ah |
07h |
Implicit asymmetric access state transition fail |
2Ah |
08h |
Priority Changed |
2Ah |
09h |
Capacity Data Has Changed |
2Ah |
10h |
Timestamp Changed |
2Bh |
00h |
Copy cannot execute since host cannot disconnect |
2Ch |
00h |
Command sequence error |
2Ch |
01h |
Too many windows specified |
2Ch |
02h |
Invalid combination of windows specified |
2Ch |
03h |
Current program area is not empty |
2Ch |
04h |
Current program area is empty |
2Ch |
05h |
Persistent prevent conflict |
2Ch |
06h |
Persistent prevent conflict |
2Ch |
07h |
Previous busy status |
2Ch |
08h |
Previous task set full status |
2Ch |
09h |
Previous reservation conflict status |
2Ch |
0Ah |
Partition or collection contains user objects |
2Ch |
0Bh |
Not Reserved |
2Dh |
00h |
Overwrite error on update in place |
2Eh |
00h |
Insufficient time for operation |
2Fh |
00h |
Commands cleared by another initiator |
30h |
00h |
Incompatible medium installed |
30h |
01h |
Cannot read medium - unknown format |
30h |
02h |
Cannot read medium - incompatible format |
30h |
03h |
Cleaning cartridge installed |
30h |
04h |
Cannot write medium - unknown format |
30h |
05h |
Cannot write medium - incompatible format |
30h |
06h |
Cannot format medium - incompatible medium |
30h |
07h |
Cleaning failure |
30h |
08h |
Cannot write - application code mismatch |
30h |
09h |
Current session not fixated for append |
30h |
10h |
Medium not formatted |
30h |
11h |
Cannot write medium - Unsupported medium write speed |
31h |
00h |
Medium format corrupted |
31h |
01h |
Format command failed |
31h |
02h |
Zoned formatting failed due to spare linking |
32h |
00h |
No defect spare location available |
32h |
01h |
Defect list update failure |
33h |
00h |
Tape length error |
34h |
00h |
Enclosure failure |
35h |
00h |
Enclosure services failure |
35h |
01h |
Unsupported enclosure function |
35h |
02h |
Enclosure services unavailable |
35h |
03h |
Enclosure services transfer failure |
35h |
04h |
Enclosure services transfer refused |
35h |
05h |
Enclosure services checksum error |
36h |
00h |
Ribbon, ink, or toner failure |
37h |
00h |
Rounded parameter |
38h |
00h |
Event status notification |
38h |
02h |
ESN - Power management class event |
38h |
04h |
ESN - Media class event |
38h |
06h |
ESN - Device busy class event |
39h |
00h |
Saving parameters not supported |
3Ah |
00h |
Medium not present |
3Ah |
01h |
Medium not present - tray closed |
3Ah |
02h |
Medium not present - tray open |
3Ah |
03h |
Medium not present - loadable |
3Ah |
04h |
Medium not present - medium auxiliary memory accessible |
3Bh |
00h |
Sequential positioning error |
3Bh |
01h |
Tape position error at beginning-of-medium |
3Bh |
02h |
Tape position error at end-of-medium |
3Bh |
03h |
Tape or electronic vertical forms unit not ready |
3Bh |
04h |
Slew failure |
3Bh |
05h |
Paper jam |
3Bh |
06h |
Failed to sense top-of-form |
3Bh |
07h |
Failed to sense bottom-of-form |
3Bh |
08h |
Reposition error |
3Bh |
09h |
Read past end of medium |
3Bh |
0Ah |
Read past beginning of medium |
3Bh |
0Bh |
Position past end of medium |
3Bh |
0Ch |
Position past beginning of medium |
3Bh |
0Dh |
Medium destination element full |
3Bh |
0Eh |
Medium source element empty |
3Bh |
0Fh |
End of medium reached |
3Bh |
11h |
Medium magazine not accessible |
3Bh |
12h |
Medium magazine removed |
3Bh |
13h |
Medium magazine inserted |
3Bh |
14h |
Medium magazine locked |
3Bh |
15h |
Medium magazine unlocked |
3Bh |
16h |
Mechanical positioning or changer error |
3Bh |
17h |
Read past end of user object |
3Ch |
00h |
Reserved |
3Dh |
00h |
Invalid bits in identify message |
3Eh |
00h |
Logical unit has not self-configured yet |
3Eh |
01h |
Logical unit failure |
3Eh |
02h |
Timeout on logical unit |
3Eh |
03h |
Logical unit failed self-test |
3Eh |
04h |
Logical unit unable to update self-test |
3Fh |
00h |
Target operating conditions have changed |
3Fh |
01h |
Microcode has been changed |
3Fh |
02h |
Changed operating definition |
3Fh |
03h |
Inquiry data has changed |
3Fh |
04h |
Component device attached |
3Fh |
05h |
Device identifier changed |
3Fh |
06h |
Redundancy group created or modified |
3Fh |
07h |
Redundancy group deleted |
3Fh |
08h |
Spare created or modified |
3Fh |
09h |
Spare deleted |
3Fh |
0Ah |
Volume set created or modified |
3Fh |
0Bh |
Volume set deleted |
3Fh |
0Ch |
Volume set deassigned |
3Fh |
0Dh |
Volume set reassigned |
3Fh |
0Eh |
Reported luns data has changed |
3Fh |
0Fh |
Echo buffer overwritten |
3Fh |
10h |
Medium loadable |
3Fh |
11h |
Medium auxiliary memory accessible |
40h |
00h |
RAM failure |
40h |
80h |
Diagnostic failure on component 80 |
40h |
81h |
Diagnostic failure on component 81 |
40h |
82h |
Diagnostic failure on component 82 |
40h |
83h |
Diagnostic failure on component 83 |
40h |
84h |
Diagnostic failure on component 84 |
40h |
85h |
Diagnostic failure on component 85 |
40h |
86h |
Diagnostic failure on component 86 |
40h |
87h |
Diagnostic failure on component 87 |
40h |
88h |
Diagnostic failure on component 88 |
40h |
89h |
Diagnostic failure on component 89 |
40h |
8Ah |
Diagnostic failure on component 8A |
40h |
8Bh |
Diagnostic failure on component 8B |
40h |
8Ch |
Diagnostic failure on component 8C |
40h |
8Dh |
Diagnostic failure on component 8D |
40h |
8Eh |
Diagnostic failure on component 8E |
40h |
8Fh |
Diagnostic failure on component 8F |
40h |
90h |
Diagnostic failure on component 90 |
40h |
91h |
Diagnostic failure on component 91 |
41h |
00h |
Data path failure |
42h |
00h |
Power-on or self-test failure |
43h |
00h |
Message error |
44h |
00h |
Internal target failure |
44h |
71h |
ATA device failed set features |
45h |
00h |
Select or reselect failure |
46h |
00h |
Unsuccessful soft reset |
47h |
00h |
SCSI parity error |
47h |
01h |
Data phase CRC error detected |
47h |
02h |
SCSI parity error detected during ST data phase |
47h |
03h |
Information unit iuCRC error detected |
47h |
04h |
Asynchronous information protection error detected |
47h |
05h |
Protocol service CRC error |
47h |
06h |
Phy Test Function in Progress |
47h |
7Fh |
Some commands cleared by iSCSI protocol event |
48h |
00h |
Initiator detected error message received |
49h |
00h |
Invalid message error |
4Ah |
00h |
Command phase error |
4Bh |
00h |
Data phase error |
4Bh |
01h |
Invalid target port transfer tag received |
4Bh |
02h |
Too much write data |
4Bh |
03h |
Ack/Nak timeout |
4Bh |
04h |
Nak received |
4Bh |
05h |
Data offset error |
4Bh |
06h |
Initiator response timeout |
4Ch |
00h |
Logical unit failed self-configuration |
4Dh |
00h |
Tagged overlapped commands (00 = Queue Tag) |
4Dh |
01h |
Tagged overlapped commands (01 = Queue Tag) |
4Dh |
02h |
Tagged overlapped commands (02 = Queue Tag) |
4Dh |
03h |
Tagged overlapped commands (03 = Queue Tag) |
4Dh |
04h |
Tagged overlapped commands (04 = Queue Tag) |
4Dh |
05h |
Tagged overlapped commands (05 = Queue Tag) |
4Dh |
06h |
Tagged overlapped commands (06 = Queue Tag) |
4Dh |
07h |
Tagged overlapped commands (07 = Queue Tag) |
4Eh |
00h |
Operlapped commands attempted |
4Fh |
00h |
Reserved |
50h |
00h |
Write append error |
50h |
01h |
Write append position error |
50h |
02h |
Position error related to timing |
51h |
00h |
Erase failure |
51h |
01h |
Erase failure - incomplete erase operation detected |
52h |
00h |
Cartridge fault |
53h |
00h |
Media load or eject failed |
53h |
01h |
Unload tape failure |
53h |
02h |
Medium removal prevented |
54h |
00h |
SCSI to host system interface failure |
55h |
00h |
System resource failure |
55h |
01h |
System buffer full |
55h |
02h |
Insufficient reservation resources |
55h |
03h |
Insufficient resources |
55h |
04h |
Insufficient registration resources |
55h |
05h |
Insufficient access control resources |
55h |
06h |
Auxiliary memory out of space |
55h |
07h |
Quota Error |
56h |
00h |
Reserved |
57h |
00h |
Unable to recover table-of-contents |
58h |
00h |
Generation does not exist |
59h |
00h |
Updated block read |
5Ah |
00h |
Operator request or state change input |
5Ah |
01h |
Operator medium removal request |
5Ah |
02h |
Operator selected write protect |
5Ah |
03h |
Operator selected write permit |
5Bh |
00h |
Log exception |
5Bh |
01h |
Threshold condition met |
5Bh |
02h |
Log counter at maximum |
5Bh |
03h |
Log list codes exhausted |
5Ch |
00h |
RPL status change |
5Ch |
01h |
Spindles synchronized |
5Ch |
02h |
Spindles not synchronized |
5Dh |
00h |
Failure prediction threshold exceeded |
5Dh |
01h |
Media failure prediction threshold exceeded |
5Dh |
02h |
Logical unit failure prediction threshold exceeded |
5Dh |
03h |
Spare area exhaustion prediction threshold exceeded |
5Dh |
10h |
Hardware impending failure general hard drive failure |
5Dh |
11h |
Hardware impending failure drive error rate too high |
5Dh |
12h |
Hardware impending failure data error rate too high |
5Dh |
13h |
Hardware impending failure seek error rate too high |
5Dh |
14h |
Hardware impending failure too many block reassigns |
5Dh |
15h |
Hardware impending failure access times too high |
5Dh |
16h |
Hardware impending failure start unit times too high |
5Dh |
17h |
Hardware impending failure channel parametrics |
5Dh |
18h |
Hardware impending failure controller detected |
5Dh |
19h |
Hardware impending failure throughput performance |
5Dh |
1Ah |
Hardware impending failure seek time performance |
5Dh |
1Bh |
Hardware impending failure spin-up retry count |
5Dh |
1Ch |
Hardware impending failure drive calibration retry count |
5Dh |
20h |
Controller impending failure general hard drive failure |
5Dh |
21h |
Controller impending failure drive error rate too high |
5Dh |
22h |
Controller impending failure data error rate too high |
5Dh |
23h |
Controller impending failure seek error rate too high |
5Dh |
24h |
Controller impending failure too many block reassigns |
5Dh |
25h |
Controller impending failure access times too high |
5Dh |
26h |
Controller impending failure start unit times too high |
5Dh |
27h |
Controller impending failure channel parametrics |
5Dh |
28h |
Controller impending failure controller detected |
5Dh |
29h |
Controller impending failure throughput performance |
5Dh |
2Ah |
Controller impending failure seek time performance |
5Dh |
2Bh |
Controller impending failure spin-up retry count |
5Dh |
2Ch |
Controller impending failure drive calibration retry count |
5Dh |
30h |
Data channel impending failure general hard drive failure |
5Dh |
31h |
Data channel impending failure drive error rate too high |
5Dh |
32h |
Data channel impending failure data error rate too high |
5Dh |
33h |
Data channel impending failure seek error rate too high |
5Dh |
34h |
Data channel impending failure too many block reassigns |
5Dh |
35h |
Data channel impending failure access times too high |
5Dh |
36h |
Data channel impending failure start unit times too high |
5Dh |
37h |
Data channel impending failure channel parametrics |
5Dh |
38h |
Data channel impending failure controller detected |
5Dh |
39h |
Data channel impending failure throughput performance |
5Dh |
3Ah |
Data channel impending failure seek time performance |
5Dh |
3Bh |
Data channel impending failure spin-up retry count |
5Dh |
3Ch |
Data channel impending failure drive calibration retry count |
5Dh |
40h |
Servo impending failure general hard drive failure |
5Dh |
41h |
Servo impending failure drive error rate too high |
5Dh |
42h |
Servo impending failure data error rate too high |
5Dh |
43h |
Servo impending failure seek error rate too high |
5Dh |
44h |
Servo impending failure too many block reassigns |
5Dh |
45h |
Servo impending failure access times too high |
5Dh |
46h |
Servo impending failure start unit times too high |
5Dh |
47h |
Servo impending failure channel parametrics |
5Dh |
48h |
Servo impending failure controller detected |
5Dh |
49h |
Servo impending failure throughput performance |
5Dh |
4Ah |
Servo impending failure seek time performance |
5Dh |
4Bh |
Servo impending failure spin-up retry count |
5Dh |
4Ch |
Servo impending failure drive calibration retry count |
5Dh |
50h |
Spindle impending failure general hard drive failure |
5Dh |
51h |
Spindle impending failure drive error rate too high |
5Dh |
52h |
Spindle impending failure data error rate too high |
5Dh |
53h |
Spindle impending failure seek error rate too high |
5Dh |
54h |
Spindle impending failure too many block reassigns |
5Dh |
55h |
Spindle impending failure access times too high |
5Dh |
56h |
Spindle impending failure start unit times too high |
5Dh |
57h |
Spindle impending failure channel parametrics |
5Dh |
58h |
Spindle impending failure controller detected |
5Dh |
59h |
Spindle impending failure throughput performance |
5Dh |
5Ah |
Spindle impending failure seek time performance |
5Dh |
5Bh |
Spindle impending failure spin-up retry count |
5Dh |
5Ch |
Spindle impending failure drive calibration retry count |
5Dh |
60h |
Firmware impending failure general hard drive failure |
5Dh |
61h |
Firmware impending failure drive error rate too high |
5Dh |
62h |
Firmware impending failure data error rate too high |
5Dh |
63h |
Firmware impending failure seek error rate too high |
5Dh |
64h |
Firmware impending failure too many block reassigns |
5Dh |
65h |
Firmware impending failure access times too high |
5Dh |
66h |
Firmware impending failure start unit times too high |
5Dh |
67h |
Firmware impending failure channel parametrics |
5Dh |
68h |
Firmware impending failure controller detected |
5Dh |
69h |
Firmware impending failure throughput performance |
5Dh |
6Ah |
Firmware impending failure seek time performance |
5Dh |
6Bh |
Firmware impending failure spin-up retry count |
5Dh |
6Ch |
Firmware impending failure drive calibration retry count |
5Dh |
FFh |
Failure prediction threshold exceeded (FALSE) |
5Eh |
00h |
Low power condition on |
5Eh |
01h |
Idle condition activated by timer |
5Eh |
02h |
Standby condition activated by timer |
5Eh |
03h |
Idle condition activated by command |
5Eh |
04h |
Standby condition activated by command |
5Eh |
41h |
Power state change to active |
5Eh |
42h |
Power state change to idle |
5Eh |
43h |
Power state change to standby |
5Eh |
45h |
Power state change to sleep |
5Eh |
47h |
Power state change to device control |
5Fh |
00h |
Reserved |
60h |
00h |
Lamp failure |
61h |
00h |
Video acquisition error |
61h |
01h |
Unable to acquire video |
61h |
02h |
Out of focus |
62h |
00h |
Scan head positioning error |
63h |
00h |
End of user area encountered on this track |
63h |
01h |
Packet does not fit in available space |
64h |
00h |
Illegal mode for this track |
64h |
01h |
Invalid packet size |
65h |
00h |
Voltage fault |
66h |
00h |
Automatic document feeder cover up |
66h |
01h |
Automatic document feeder lift up |
66h |
02h |
Document jam in automatic document feeder |
66h |
03h |
Document miss-feed automatic in document feeder |
67h |
00h |
Configuration failure |
67h |
01h |
Configuration of incapable logical units failed |
67h |
02h |
Add logical unit failed |
67h |
03h |
Modification of logical unit failed |
67h |
04h |
Exchange of logical unit failed |
67h |
05h |
Remove of logical unit failed |
67h |
06h |
Attachment of logical unit failed |
67h |
07h |
Creation of logical unit failed |
67h |
08h |
Assign failure occurred |
67h |
09h |
Multiply assigned logical unit |
67h |
0Ah |
Set target port groups command failed |
68h |
00h |
Logical unit not configured |
69h |
00h |
Data loss on logical unit |
69h |
01h |
Multiple logical unit failures |
69h |
02h |
A parity/data mismatch |
6Ah |
00h |
Information, refer to log |
6Bh |
00h |
State change has occurred |
6Bh |
01h |
Redundancy level got better |
6Bh |
02h |
Redundancy level got worse |
6Ch |
00h |
Rebuild failure occurred |
6Dh |
00h |
Recalculate failure occurred |
6Eh |
00h |
Command to logical unit failed |
6Fh |
00h |
Copy protection key exchange failure - authentication failure |
6Fh |
01h |
Copy protection key exchange failure - key not present |
6Fh |
02h |
Copy protection key exchange failure - key not established |
6Fh |
04h |
Media region code is mismatched to logical unit region |
6Fh |
05h |
Drive region must be permanent/region reset count error |
70h |
00h |
Decompression exception short algorithm ID of 00 |
70h |
01h |
Decompression exception short algorithm ID of 01 |
70h |
02h |
Decompression exception short algorithm ID of 02 |
70h |
03h |
Decompression exception short algorithm ID of 03 |
71h |
00h |
Decompression exception long algorithm ID |
72h |
00h |
Session fixation error |
72h |
01h |
Session fixation error writing lead-in |
72h |
02h |
Session fixation error writing lead-out |
72h |
03h |
Session fixation error - incomplete track in session |
72h |
04h |
Empty or partially written reserved track |
72h |
05h |
No more RZone reservations are allowed |
72h |
06h |
RMZ extension is not allowed |
72h |
07h |
No more test zone extensions are allowed |
73h |
00h |
CD control error |
73h |
01h |
Power calibration area almost full |
73h |
02h |
Power calibration area is full |
73h |
03h |
Power calibration area error |
73h |
04h |
Program memory area/RMA update failure |
73h |
05h |
Program memory area/RMA is full |
73h |
06h |
Program memory area/RMA is (almost) full |
73h |
10h |
Current power calibration area almost full |
73h |
11h |
Current power calibration area is full |
73h |
15h |
Current program memory area/RMZ is full |
73h |
16h |
Current program memory area/RMZ is almost full |
73h |
17h |
RDZ is full |