busTRACE This WEB page comes from the busTRACE 10.0 User's Manual. (Table of Contents)

Previous Topic Next Topic
 

Enhancements made from busTRACE 9.0 to busTRACE 10.0

New Applications

New Features - All Applications

  • IMPROVED! Extensive decoding for ATA/SATA commands and log pages in our CDB decoding engine. Includes decoding using little endian format.
  • IMPROVED! Latest CDB decoding engine with support for more data structures, more firmware/software defects checks.
  • IMPROVED! When a CDB is decoded, if a portion of the CDB is flagged with an error, a red error indicator will appear over the vertical scrollbar. Move the scrollbar over the indicator to bring the warning or error into view.
  • IMPROVED! On multi-column tree control, you can now right click on a single item and just copy that row/item to the clipboard.
  • IMPROVED! All tree controls now updated to use the same expand/collapse buttons that Windows uses.
  • IMPROVED! Improved high contrast display support.
  • IMPROVED! MDI applications (such as the busTRACE capture application and busSCRIPT) now have a close button on each document tab.

New Features - busTRACE Capture Application

  • NEW! On systems with multiple NUMA nodes, now captures I/O NUMA Node information. Includes capturing IRP MDL, device NUMA node, data buffer NUMA node, processor NUMA node, and others.
  • NEW! Full support for capturing extended SCSI Pass Through IOCTLs (e.g. IOCTL_SCSI_PASS_THROUGH_EX, IOCTL_SCSI_PASS_THROUGH_DIRECT_EX, SCSI_PASS_THROUGH_EX, SCSI_PASS_THROUGH_DIRECT_EX).
  • NEW! Added storage I/O subsystem event log capture. Event log activity generated by the I/O subsystem will now appear in the I/O Capture List. User can customize which events they want to capture. Event log entry background color can be customized. User can configure a trigger point on an event log.
  • NEW! Added serial port input and output trigger point support.
    NEW! If an SRB or SCSI Pass Through request takes longer than the timeout specified, but still completes successfully, we now flag the I/O as a failure and indicate the reason for the failure. While the I/O did not fail from the operating system's failure, this type of failure can be indicative of other more serious issues (not to mention the lengthy I/O delay).
  • NEW! Added full CPU enumeration and decoding to the System Explorer.
  • NEW! Added full SMBIOS enumeration and decoding to the System Explorer (up to v2.8 of the SMBIOS specification).
  • NEW! Added ACPI enumeration and decoding to the System Explorer. Publicly defined ACPI table entries fully decoded.
  • NEW! Added raw hex data viewing to the System Explorer (if applicable).
  • NEW! When decoding IOCTL_ATA_PASS_THROUGH or IOCTL_ATA_PASS_THROUGH_DIRECT, we now decode the command and data transfer in the CDB window using ATA pass through CDBs. busTRACE also shows you the ATA/SATA command sent in the Command 2 column of the I/O Capture List.
  • NEW! Added ability to set a trigger point on I/O completion time. Useful if you want to know any time a given I/O takes more than a specified time to complete.
  • NEW! Added ability to force a bug check (i.e. BSOD) when a trigger point is detected. You can also configure busTRACE to block I/O from reaching the device that hit a trigger point. Both these settings are geared towards helping you leave the system and/or device in its given state when a specified trigger point is detected.
  • NEW! In the I/O Capture List, you can now right click on the I/O Originator to filter all I/O generated by the originator or filter all other drivers.
  • NEW! Added a new "Automatically remap SCSI request sent to HBA device object" in the option settings.
  • IMPROVED! Improved I/O Exclusion setting with more options on what to filter from being captured.
  • IMPROVED! Improved Submission and Completion trigger point options.
  • IMPROVED! CDB Trigger List now supports fast find. Just start typing the CDB you're looking for and it will jump to that entry.
  • IMPROVED! CDB Trigger List now supports a filter. Type in part of the CDB you're looking for and it will filter from view all CDBs that do not contain that substring.
  • IMPROVED! Sense Code Trigger List now supports fast find. Just start typing the sense code you're looking for and it will jump to that entry.
  • IMPROVED! Sense Code Trigger List now supports a filter. Type in part of the sense code you're looking for and it will filter from view all sense codes that do not contain that substring.
  • IMPROVED! Data Corruption Analysis feature will now run on HDDs/SSDs and is no longer limited due to advanced paging techniques of the file system.
  • IMPROVED! Reduced memory usage per captured I/O.
  • IMPROVED! Opening up a ZIP file in busTRACE now allows you to load multiple BTD files at one time. Dialog box can be resized now.
  • IMPROVED! Faster sort times.
  • IMPROVED! Faster loading and saving capture files.
  • IMPROVED! Improved performance updating our device tree on systems with a large number of devices (e.g. > 100 devices).
  • IMPROVED! When decoding the STORAGE_ADAPTER_DESCRIPTOR structure, we'll now show you the MaximumPhysicalPages field as a capacity value (in addition to the raw value).
  • IMPROVED! Improved performance for long running WMI queries.
  • IMPROVED! WMI queries copied to the clipboard can now be cancelled by the user. Progress indicator now displayed. Only applicable when copying a huge WMI output.
  • IMPROVED! In the device tree, improved ability to enumerate storage device drive letter when Storage Spaces, mirroring, spanning, etc. are in use.
  • IMPROVED! In the device tree, added the ability to enable/disable capture on a range of sibling devices.
  • IMPROVED! Improved support for port drivers that return a shortened SCSI Pass Through structure.
  • IMPROVED! Program will still prompt you that a reboot is required to load a newly downloaded kernel driver. If user chooses not to reboot, program will now let busTRACE capture with the old driver until the next reboot occurs.
  • IMPROVED! Improved kernel driver load settings.
  • IMPROVED! Other miscellaneous minor improvements.

New Features - busTRACE Remote Server

  • NEW! Now display a security warning when you run the application to let the user know that data is sent unencrypted over the network.
  • IMPROVED! Improved display of system's total memory

New Features - busPROBE CDB Exerciser

  • NEW! Added ability to view device by connection (new default) or by type (previous setting).
  • NEW! Added ability to view SCSI device ID in device tree.
  • NEW! Added support for > 16 byte CDBs (requires minimum Windows 8 / Server 2012 as a STORPORT miniport driver with extended SRB /STORAGE_REQUEST_BLOCK support).
  • NEW! On systems with multiple NUMA nodes, we now allow you to specify which NUMA node the buffer will come from and which NUMA node the thread will execute on.
  • IMPROVED! Added a number of predefined ATA/SATA commands you can send from busPROBE (to a device or driver that supports ATA Pass Through CDBs).
  • IMPROVED! Increased maximum CDB buffer size from 256K to 2MB. Also improved error messaging if you try and send a buffer larger than what the miniport can handle.
  • IMPROVED! User can now specify any custom CDB timeout instead of the limited options available in the drop list.
  • IMPROVED! Moved device specific settings into toolbar above device tree (like capture application) instead of down in the Properties docked pane.
  • IMPROVED! No longer let busPROBE starve the GUI dialog box when looping on a large quantity of extremely low latency CDBs.

New Features - busSCRIPT

  • NEW! Added support for > 16 byte CDBs (requires minimum Windows 8 / Server 2012 as a STORPORT miniport driver with extended SRB /STORAGE_REQUEST_BLOCK support).
  • IMPROVED! User can now specify any custom CDB timeout instead of the limited options available in the drop list.
  • IMPROVED! User can now specify any custom node pause time instead of the limited options available in the drop list.
  • FIXED! Fixed a bug where the most recently used file list was not always visible.

New Features - busCHECK

  • NEW! Added SATA defect checks for HDD/SSD.

New Features - busFAULT

  • NEW! Added support for Extended SRBs (STORAGE_REQUEST_BLOCK) and Extended SCSI Pass Through IOCTLs.
  • NEW! Added support for > 16 byte CDBs (requires minimum Windows 8 / Server 2012 as a STORPORT miniport driver with extended SRB /STORAGE_REQUEST_BLOCK support).
  • IMPROVED! Device icon colors are now synchronized with the busTRACE capture application.
  • IMPROVED! Caches the currently selected SRB status and/or check condition so that settings are restored the next time you run busFAULT.
  • IMPROVED! CDB List now supports fast find. Just start typing the CDB you're looking for and it will jump to that entry.
  • IMPROVED! CDB List now supports a filter. Type in part of the CDB you're looking for and it will filter from view all CDBs that do not contain that substring.
  • IMPROVED! Sense Code List now supports fast find. Just start typing the sense code you're looking for and it will jump to that entry.
  • IMPROVED! Sense Code List now supports a filter. Type in part of the sense code you're looking for and it will filter from view all sense codes that do not contain that substring.
  • IMPROVED! Sense Code List can now be sorted by clicking on the column list header.

New Features - busPROBE CDB Viewer

  • NEW! A new filter edit box has been added to the bottom of the list of CDBs. This allows you to quickly filter from view the CDBs you are not interested in.
  • IMPROVED! Now remembers your last selected CDB / device type and restores it the next time you run the application.
  • IMPROVED! You can now right click on a CDB and select the option to add it to the executable CDB database.

New Features - busPROBE Sense Viewer

  • NEW! You can now sort the data based on the sense code or sense description by clicking on the list control header.
  • IMPROVED! To be consistent with our other applications, moved the sense code filter option to the bottom of the list of sense codes.

New Features - GUID Explorer

  • IMPROVED! Added ability to view decoded device instance status (i.e. CM_Get_DevNode_Status()).

New Features - Filter Driver Load Order

  • IMPROVED! Dialog box now resizable
  • IMPROVED! Updated device tree with latest icons and tree buttons

Enhancements made from busTRACE 8.0 to busTRACE 9.0

New Features

  • NEW! 64-Bit Executables. Previously only the busTRACE kernel driver was 64-bit. Now we include both 32-bit and 64-bit executables.
  • NEW! No dongle / USB flash drive. Dongle no longer required. Software activation is used instead. License is for a single user license, up to 3 PCs.
  • NEW! Free reader. A free busTRACE 10.0 capture file reader is available on www.bustrace.com. The free reader is a limited subset of the full retail product.
  • NEW! Non-keyed capture clients. The busTRACE 10.0 capture client is freely available at www.bustrace.com.
  • NEW! Fully UAC aware. Most of the busTRACE applications are no longer marked as requiring Administrator privileges. Instead, busTRACE will prompt you for Administrator privileges as needed.
  • NEW! New System /Device Explorer. Shows you much more information about your system including detailed information about each capture device.
  • NEW! Color coded device icons. User can now adjust the capture device icon colors to aid during the analysis of a busTRACE capture.
  • NEW! Show kernel device names. You can configure busTRACE to show you the kernel device name (e.g. \Device\Ide\IAAStorageDevice-2) in the capture devices tree instead of the device friendly name (e.g. SONY BDRW BWU-200S).
  • NEW! Show device serial number. When available, and when configured, we will now show you the device's serial number in the device tree. You can also add a Capture Column that will show you the device serial number.
  • NEW! Blinking device icons. By right clicking on the device (or on a captured I/O), you can set busTRACE to blink that device icon. The blinking device icon appears in both the Capture Devices docked pane and the I/O capture list. This can help the user analyze I/O activity across multiple devices.
  • NEW! Device I/O filter. By right clicking on the device in the Capture Devices pane, you can configure busTRACE to filter out all I/O activity going to that one device (or multiple devices if multiple selected). Conversely, you can have busTRACE filter I/O activity from all other devices.
  • NEW! LBA Range filter. You can configure busTRACE to only show you those Read/Write sector requests that access sectors within a user provided LBA range.
  • NEW! Linked capture settings. Device capture settings are linked such that when you change a capture setting, it immediately applies to all the devices. This simplifies adjusting your capture settings. If desired, you can unlink the settings thereby allowing you individual control over each device.
  • NEW! Perform WMI query. You can configure busTRACE to perform a WMI query and save the query results with the busTRACE capture file. We provide a full list of WMI queries you can execute. This allows the user to enumerate a variety of system information and to store it in the capture file.
  • NEW! Capture DEVICE_OBJECT. You can configure busTRACE to capture the kernel's DEVICE_OBJECT structure for each device. The 'C' data structure is then fully decoded for you.
  • NEW! Capture device I/O stack. You can configure busTRACE to capture each device's I/O stack. We show you any filter drivers, class drivers, and the port driver. Note that this is NOT the same as the IRP I/O stack capture that busTRACE can also do. This new option shows you the entire I/O stack contents. The IRP I/O stack capture only shows you those device objects that are part of an IRP's I/O stack.
  • NEW! Capture device registry properties. You can configure busTRACE to enumerate and cache each device's registry properties (i.e. the SetupDiGetDeviceRegistryProperty).
  • NEW! Smart IOCTL Capture. When capturing IOCTLs, busTRACE captures the entire inbound and outbound data buffer. With some IOCTLs, only a portion of the data buffer is actually applicable. Capturing the entire data buffer results in more memory used than needed. With this option enabled, busTRACE will analyze the IOCTL to see if the amount of data can be limited to save buffer space.
  • NEW! Capture IRP Originator. As with previous versions of busTRACE, we provide you an option to capture which driver / process originated the IRP. New to busTRACE 10.0 is an option to disable this feature.
  • NEW! Capture IRP Class Driver. We now provide you an option to capture the IRP class driver that each IRP flows through.
  • NEW! Capture IRP Structure. You can now configure busTRACE to capture the entire IRP structure. The IRP structure is decoded in the "Data Structures" docked pane.
  • NEW! Capture and Exit. Previously, the busTRACE application needed to stay resident while it captured I/O activity. With busTRACE 10.0's new Capture and Exit feature, you can initiate a busTRACE capture and exit the application while leaving the capture active. You can then restart busTRACE at a later time and see the I/O activity that was captured while the application was not resident.
  • NEW! SRB function trigger point. Boolean logic SRB function trigger point now included.
  • NEW! SRB status trigger point. Boolean logic SRB status trigger point now included.
  • NEW! Target status trigger point. Boolean logic target (i.e. SCSI) trigger point now included.
  • NEW! CDB trigger point. Boolean logic CDB trigger point now included.
  • NEW! Sense data trigger point. Boolean logic sense data trigger point now included.
  • NEW! URB function trigger point. Boolean logic URB function trigger point now included.
  • NEW! URB status trigger point. Boolean logic URB status trigger point now included.
  • NEW! Highlighted Rows. PnP additions and removals get their own highlighted row (among others), see Tools->Options->Colors.
  • NEW! Multi-Core aware post capture analysis. When you stop the capture, busTRACE scans through all of the captured I/Os looking for software, firmware, and driver defects. With busTRACE 10.0, this feature is now multi-core aware.
  • NEW! New "Class Driver" capture column. See the class driver for the IRP I/O stack
  • NEW! New "IRP Status" capture column. See the 32-bit IRP status value in its own column
  • NEW! New "Time Between I/Os" capture column. See the time between I/Os initiated on the device object.
  • NEW! New "Device Name" capture column. See the name of the device that processed the I/O in its own column.
  • NEW! Enhanced "Raw Data" docked window. You can now select which captured data you would like to view. For example, the data transfer, the raw hex SRB, raw hex URB, cached I/O stack location, etc. You can now see much more information than was previously available with busTRACE 8.0.
  • NEW! Enhanced "Data Structures" docked window. Similar to the "Raw Data" docked tab, you now select which item you would like busTRACE to decode for you. You can now see much more information than was previously available with busTRACE 8.0.
  • NEW! Display data transfer lengths as hex. busTRACE can now be configured to show you the data transfer lengths in hex or decimal.
  • NEW! User adjustable I/O Capture List colors. You can adjust the background colors we use for Device Arrival Notifications, Device Removal Notifications, User Injected Messages, Resumed busTRACE Capture, and the Alternating Grid Item Color. In addition, you can change the text color used for Flagged I/O Defects.
  • NEW! Enhanced Driver Settings dialog. Easier to adjust your busTRACE driver settings. Includes new advanced driver placement utility.
  • NEW! Enumerates and caches device Inquiry data with every capture. User adjustable in device driver options.
  • NEW! Enumerates and caches CD/DVD/BD feature descriptors. User adjustable in device driver options.
  • NEW! Enumerates and caches device USB descriptors and pipes. User adjustable in device driver options.
  • NEW! Export to Unicode or Hex HTML/Text/XML/CSV files. User can now choose whether the text output should be Unicode or ANSI.
  • NEW! Remote Capture Save. When performing a remote capture, a new option is now available that allows the user to save the capture file directly on the remote server.
  • NEW! Added support for vendor specific CDB decoding plug-in DLLs.
  • IMPROVED! Automatic e-mail notification. Enhanced for busTRACE 10.0 with easier message entry.
  • IMPROVED! Capture IRP I/O Stack. Like previous versions, you can configure busTRACE to capture the entire I/O stack for each IRP. This allows you to see which drivers inserted themselves into the I/O stack. The version in busTRACE 10.0 has been optimized.
  • IMPROVED! User configurable default settings. You can click on the Default Settings button in the Capture Settings docked pane to reset the capture settings back to their default settings. You can also alter the "default" settings to your preferred settings.

Enhancements made from busTRACE 7.0 to busTRACE 8.0

New Applications

  • NEW! Added our new busCHECK application. This application allows you to automatically check for device and I/O subsystem defects. For example, common device firmware bugs are automatically detected and flagged for your attention.

New Features

  • NEW! Added ability to Import Finisar Bus Doctor ATAPI states capture text file.
  • NEW! When you stop capturing I/O activity, busTRACE will now automatically scan all the captured I/Os looking for any I/O subsystem defects. If a defect is detected, a red defect indicator will appear directly above the I/O Capture List. The I/O that has an error will appear in red text. Click on the I/O to find out details about the defect that busTRACE has detected.
  • NEW! Added a new "Extended IRP Capture" option to the capture settings. With this option enabled, busTRACE will now capture additional IRP information, such as the I/O stack values (i.e. IO_STACK_LOCATION), and show them to you in the new Extended IRP Capture tab. The additional information is captured going down and back up the I/O stack.
  • NEW! The user can configure which defect checks to enable / disable. Simply go to the Tools->Options->Defect Analysis option.
  • NEW! We have added a new Network compression checkbox to the capture settings. When enabled (default is enabled) during a remote capture, busTRACE will compress the captured data before sending it across the network. This can both reduce network traffic while also improving the transfer speed between the remote server and the busTRACE application.
  • NEW! Within the busTRACE capture application, we have added decoding support for Common Storage Management Interface (CSMI) IOCTLs that might be captured.
  • NEW! Within the busPROBE CDB Exerciser, we have added a "Data Structures" tab. Just like within the busTRACE capture application, you can now see the SCSI Pass Through structure (i.e. SCSI_PASS_THROUGH_DIRECT) as it was submitted to the port/miniport driver and as it was returned from the port/miniport driver.
  • NEW! Within the busPROBE CDB Exerciser, if a firmware bug is detected in the processed CDB, a new red caption bar will appear above the decoded CDB letting you that a defect has been detected.
  • NEW! Within the busPROBE CDB Exerciser, added an option to reset a device. You can right click on the device in the "Device List" tree and choose the "Reset Device" option. Alternatively, you can go to the Tools->Reset Device menu option. Note that your ability to reset a device is dependent on your port / miniport driver. It may also reset the entire bus causing all devices on the bus to be reset.
  • NEW! Within the busPROBE CDB Exerciser, we have added support for the Common Storage Management Interface (CSMI). Simply place a checkmark on the "Scan for CSMI Devices" option (in the Properties window) and busPROBE will also scan for and display any CSMI devices.
  • NEW! Within the busPROBE CDB Exerciser, if a CDB takes a long time, a new "Processing CDB" dialog will appear. This shows you the time elapsed and provides you an "Abort" option. If you click on the Abort, we will try and abort the command. Our ability to abort a "stuck" command is dependent on the port / miniport driver. If the port driver doesn't properly support aborting the command, we then provide the user an option to allow us to reset the bus. Here too, our ability to reset the bus is port / miniport driver dependent.
  • NEW! Within the busPROBE CDB Exerciser, when you select a device, we will now show you additional device information down in the "Properties" docked pane.
  • NEW! Similar to our busPROBE enhancement, you can now attempt to abort / reset a "hung" CDB within busSCRIPT. This is true when creating executable scripts as well.
  • NEW! In the busTRACE remote server, when you minimize the software, we will now show you the IP address on the taskbar icon.
  • NEW! Added theme support. You can now choose from one of several color schemes to customize the look of busTRACE, busPROBE, and more. Simply choose the Theme option from the View main menu.
  • NEW! Added a new "Sense Data (All)" column that you can add to the I/O Capture List. You can also export this value when exporting to file. This column shows you the captured sense data (up to 18 bytes) in hex format. The previously available "Sense Data" is still an option as well though this option only shows you the sense key and sense code.
  • NEW! Added decoding support for IEEE 1667 v1.1 devices. Standard Protocol for Authentication in Host Attachments of Transient Storage Devices.
  • IMPROVED! When performing a remote capture, with live capture disabled, depending on your network speed, and size of your capture buffer, the time it took to stop the capture to begin your analysis could be long. With this release, we now show you a progress indicator, average transfer speed, and approximate time remaining.
  • IMPROVED! When viewing the Filtered Commands dialog box, click on the "Command/Status" tab to view the CDBs you can filter from view. With this release, we show you sub-categories. This makes it easier to filter out specific CDBs. For example, busTRACE 7.0 would show you a Get Configuration entry for each time of feature you request. With busTRACE 8.0, then now all appear under a "Get Configuration" sub-tree. You can select / deselect the parent item to select / deselect all the child items.
  • IMPROVED! Support for a new busTRACE capture file format that busCHECK produces (with additional I/O defect information).
  • IMPROVED! When multiple connections are made within busTRACE, and you configure busTRACE to show each connection on screen at the same time, we will now put a gray background on the inactive views.
  • IMPROVED! Latest CDB decoding and defect check database.
  • IMPROVED! Updated CDB database shows you additional details, depending on the CDB, in the "Command 1" column.
  • IMPROVED! Within our CDB decoding database, we previously highlighted only CDB errors with a red background. We now support a new warning indicator. These are items that are not definite bugs but something the vendor should be aware of these. These appear with a yellow background.
  • IMPROVED! If you start a busTRACE capture with no devices selected, a warning indicator will appear letting you know that you have no devices enabled. Configuring a capture such as this is allowed, as you may want to capture a Plug and Play event (i.e. new device insertion) only. You are given the option to disable the warning.

Enhancements made from busTRACE 6.0 to busTRACE 7.0

New Applications

  • NEW! Includes busFAULT, an application designed to allow you to simulate check condition or SRB Status device errors. Includes integration with the busTRACE capture engine.
  • NEW! Includes busSTRESS, an application designed to stress test one or more hard drives. This application will perform a read / write / compare stress test on one or more paths. Any file error or data miscompare is detected and reported to the user. Includes full integration with the busTRACE capture engine.
  • NEW! Includes a new utility, accessible from the busTRACE 10.0 Start Menu, that allows you to view any file's contents in a hex editor.
  • NEW! Includes CD/DVD Exclusive Access Status. This application allows you to see which application has an exclusive access lock on your CD/DVD/BD devices.

New Features

  • NEW! The busTRACE capture engine now features integration with busFAULT and busSTRESS. The I/O Capture List also features updated tooltip help for the error column and device column.
  • NEW! The busTRACE bus analyzer, the busPROBE CDB Exerciser, busFAULT, and the CD/DVD Exclusive Access Status application all now show you the device's attached drive letter(s). You can configure to remove the drive letter from the display if you prefer.
  • NEW! A new "Restart Capture" feature has been added to busTRACE. This allows you to reset and restart the capture while it is active. This is a quick way to empty the capture buffer and have it continue capturing I/O activity.
  • NEW! Within the busTRACE capture application, you can save and reload filter settings.
  • NEW! Added a new tooltip for the Raw Data column within the busTRACE capture application. This allows you to view up to 128 bytes of the data transferred without having to click on the I/O.
  • NEW! In each of our hex buffer editors, you can now click on a toolbar button that allows you to manually enter a buffer offset value you would like to jump to.
  • NEW! Within the busPROBE and busSTRESS buffer viewers, you can now use the new Find toolbar buttons to find and move to a specified hex or ASCII data pattern.
  • NEW! busPROBE is now Plug and Play aware.
  • NEW! busPROBE now includes a checkbox where you can configure the CDB Exerciser to show you the drive letters (if available) allocated to your storage devices.
  • NEW! Our CD/DVD Exclusive Access Status application now includes a checkbox where you can have it show the CD/DVD drive letter or not. Also, if a lock attempt fails because the file system is active, we now prompt you to ask if you want us to dismount the file system before trying again.
  • NEW! When capturing I/O requests generated from ring 3 applications, such as SCSI Pass Through IOCTLs, busTRACE 10.0 will now tell you the the application that generated the I/O request.
  • IMPROVED! Updated CDB decoding engine.
  • IMPROVED! Updated executable CDB database
  • IMPROVED! Updated icons throughout product.
  • IMPROVED! Updated busTRACE 10.0 Start Menu includes easy access to new applications.
  • IMPROVED! Our CD/DVD Exclusive Access Status utility has been updated to support Windows XP (when IMAPIv2 is present).
  • IMPROVED! The Advanced busTRACE Filter Driver Placement dialog has been updated to provide our technical support group with auto-adjustment settings.
  • IMPROVED! Those applications that use a checkbox to enable or disable a feature have been updated to now always show a checkbox. The checkbox can be checked or unchecked with a single click.
  • IMPROVED! The ATA Identify application has been updated to show Serial ATA (SATA) and Serial ATAPI (SATAPI) fields.
  • IMPROVED! There have been other minor updates and enhancements throughout the entire product.
  • IMPROVED! If you configure busTRACE to automatically e-mail you of an error, or trigger point, we will now also e-mail you if we lost our connection to a remote server (if performing a remote capture).

There have been many more features and enhancements that have gone into busTRACE 6.0 after it was initially released and prior to the busTRACE 10.0 release. Please review the busTRACE 6.0 Change Log for complete details.

Enhancements made from busTRACE 5.0 to busTRACE 6.0

New Applications

  • NEW! Includes busSCRIPT, a new easy-to-use CDB scripting application. Drag and drop simplicity; no programming required for simple scripts; create self-contained executable scripts; CDB execution results can be saved to a busTRACE capture file.
  • NEW! Includes the busTRACE 10.0 Start Menu, a new front-end menuing application that guides you to the tool you are interested in running.
  • NEW! Removed support for the older busTRACE proprietary "green" dongle. Instead, we now only support our busTRACE USB Flash Drives. A free replacement flash drive is available for all customers whose subscription is active (if you have the older green dongle). This has the advantage of using Microsoft's built-in drivers to communicate with the flash drive instead of depending on a proprietary 3rd party driver.
  • NEW! The user's manual is no longer a separate PDF file. It is now an integrated HTML Help file.

All Applications

  • NEW! Full Windows Vista compatibility. This includes having all programs marked for proper Vista access requirements and adjusting the user interface for better Vista compatibility. Our kernel drivers also contain the necessary cross-certificate to be fully compatible with Windows Vista x64's requirement for signed device drivers.
  • NEW! A new busTRACE 10.0 Start Menu option is available on the toolbar of each of our applications. A drop down list can take you immediately to the tool of your choice. This allows you to quickly move from one busTRACE 10.0 application to another.
  • NEW! A new shared CDB Execution Database is stored in an XML format. You can set the location of this database file to a shared network drive and share it among multiple busTRACE users. Any enhancement made by one busTRACE user is automatically seen by all other busTRACE users that are configured to share the same file.
  • NEW! All applications and drivers are now digitally signed as having come from busTRACE Technologies. This ensures that our programs have not been altered.
  • IMPROVED! Significantly improved user interface for dragging and dropping of panes. You can easily see where your new will be be docked, tabbed, or floating.
  • IMPROVED! Child window toolbars no longer wrap around when the window isn't large enough to show the whole toolbar. Instead an "expand" button will appear on the right side of the toolbar which you can click to view the hidden toolbar features.
  • IMPROVED! Enhanced busTRACE subscription handling.
  • IMPROVED! We've enhanced our flash drive recovery tool in case busTRACE is unable to detect its flash drive.
  • IMPROVED! Minor enhancements to our Internet auto-updater.
  • IMPROVED! Shared busTRACE "About" box across all applications.
  • IMPROVED! When you use your mouse wheel, the scroll effect will now occur in the window that the mouse is floating over (instead of only the active window).

Capturing I/O Activity

  • NEW! Kernel Mode CDB Filter. Let busTRACE know exactly which CDBs you are interested in capturing or which CDBs you specifically do not want captured. Unlike our previous filter capability, this new feature causes the kernel driver to skip capturing the CDB altogether. This allows you to capture only the CDBs you are interested in.
  • NEW! SCSI Request Block (SRB) and SCSI Pass Through (SPTI) software defect detection.
  • NEW! View all attached user comments in its own docked pane. Click on a comment and the I/O Capture List will immediately move to that I/O.
  • NEW! Compare two captured I/Os in our new Side-by-Side I/O Comparison feature. You can even compare two I/Os across two separate capture documents. Synchronized scroll bars allow you to visually see any differences between the two captured I/Os.
  • NEW! Track mouse movements over interleaved I/O activity. While viewing interleaved I/O activity, as you move the mouse over each captured I/O, busTRACE will now highlight where the I/O starts, where it finishes, and what I/O activity (if any) occurs in between.
  • NEW! Stop multiple active busTRACE captures. You might have busTRACE capturing I/O simultaneously across multiple networked PCs. You can now have busTRACE stop all capture sessions at the same time.
  • NEW! A new startup capture settings page has been added where you can adjust busTRACE's default capture settings.
  • NEW! Copy one or more captured CDBs and paste into busSCRIPT, our CDB scripting application.
  • NEW! Save any captured CDB to our shared CDB Execution Database and use within busPROBE or busSCRIPT.
  • NEW! Drag and drop a busTRACE capture file (either a .BTD or a .ZIP file) onto the busTRACE 10.0 Start Menu desktop icon and our bus capture program will automatically load and show you the contents.
  • NEW! Find and jump to a specified I/O Counter. Press Ctrl+G, or enter the I/O Counter in the toolbar, and find and jump to any specified I/O Counter.
  • IMPROVED! User can now provide unlimited capture clients while their subscription is active. There is no longer any need to purchase additional capture clients (you must keep your busTRACE subscription active in order to continue using this feature).
  • IMPROVED! Updated our kernel driver to handle drivers that support a dual role of being a bus driver and a filter driver.
  • IMPROVED! Our I/O Capture List now supports Windows XP Themes for its visual display.
  • IMPROVED! Added a user option that allows you to turn on or off the capturing of IOCTL requests.
  • IMPROVED! The capture column IRP Direction is no longer shown by default in the I/O Capture List. Instead, if you configure busTRACE to show interleaved I/O activity, the IRP direction indicator will appear immediately to the right of the Counter field.
  • IMPROVED! Changed default capture behavior to capture Plug and Play (PnP) requests.
  • IMPROVED! Added two new startup options such as having busTRACE automatically launch when Windows starts, as well as automatically starting the capture when the application starts.
  • IMPROVED! Added two new columns you can have added to the I/O Capture List. These are the Device Pointer and IRP Pointer columns. This allows you to view the PDEVICE_OBJECT and PIRP hex values for the captured I/O request. This information is also available in the I/O Details dialog box as well as the Export options. A 64-bit hex value is displayed if the pointers are captured on an x64 system.
  • IMPROVED! Enhanced our protocol between the client and server when doing a remote bus capture.
  • IMPROVED! Icons used to show inbound or outbound data transfer have been adjusted to make it easier to visually note the direction in the I/O Capture List.

Generating I/O Activity

  • NEW! When sending a single CDB through busPROBE, our interface now allows you to type in a CDB filter string. For example, if you're only interested in viewing all available CDBs that contain "Read" in it, you simply type in Read into the edit box and all non-"Read" CDBs will be filtered from view.
  • IMPROVED! Added more built-in CDBs that are available to busPROBE as well as busSCRIPT.
  • IMPROVED! If you loop on sending CDBs within busPROBE, and then save the results to a busTRACE capture file, busPROBE will now save for you the first and last CDB sent along with a descriptive note within the capture. Previous versions only captured the last CDB submitted.
  • IMPROVED! When defining a custom execution CDB, added the ability to define multiple supported device types for a single CDB.
  • IMPROVED! Internal improvements in saving the CDB results to a busTRACE capture file.
  • IMPROVED! Within the CDB Viewer, the sorting option has been removed from the docked Properties window. Instead, you can now simply click on the header control (directly above the list of available CDBs to decode) to sort. Click on the "Opcode" column to sort by opcode. Click on the "Command Descriptor Block" column to sort by the CDB name.
  • IMPROVED! Additional internal improvements have been made across the CDB Exerciser, ATA/ATAPI Identify, CDB Viewer, and the Sense Viewer.